Discontinued
Dual-element Cardioid Condenser Rigid-pipe Microphone
ES995
$750.00
ES995
Features
- Designed for quality sound reinforcement in demanding situations, especially those requiring separate miking for PA and broadcast
- Dual-element configuration features completely isolated circuit grounds for each channel, greatly reducing the potential for hum
- Fixed low-frequency roll-off (120 Hz, 12 dB/octave) and 15 dB pad
- Dual integral windscreens ensure ultimate security against wind noise and plosives
- Integral mute switch on base with three modes (push-to-mute, toggle, push-to-talk) and LED indicator light
- Sturdy metal desk stand base houses dual power module with 6-pin XLRM-type output connector
- Includes 30' splitter cable (6-pin XLRF-type to two 3-pin XLRM-type) for use with in-house and remote feeds
- Small-diameter rigid-pipe design with pivoting ball-in-socket
Specifications
Microphones | |
---|---|
Element | Two fixed-charge back plate, permanently polarized condensers |
Polar Pattern | Cardioid |
Frequency Response | 90-15,000 Hz |
Low Frequency Roll Off | Fixed 120 Hz, 12 dB/octave |
Open Circuit Sensitivity | -41 dB (8.9 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 138 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 109 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 3 mA typical |
Switches | (on circuit board) SW1: Normal/-15 dB SW2: Mute/Toggle/Talk SW3: Off/On |
Weight | 3.31 lb (1.5 kg) |
Cable | 30' (9.1 m) 6-conductor shielded "Y" cable - 6-pin XLRF to two 3-pin XLRM |
Dimensions | 19.51" (495.6 mm) long, 1.51" (38.4 mm) maximum head diameter |
Output Connector | Integral 6-pin XLRM-type |
Optional Interchangeable Elements | ESE-H hypercardioid (100º); ESE-0 omnidirectional (360º) |
Accessories Included | Switch cover label |
Reviews
Q&A
Downloads
ES995 Specification Sheet (Discontinued Model)