AT-ART1000
Discontinued
Direct Power sztereó mozgótekercses hangszedő

AT-ART1000

AT-ART1000
  • Áttekintés
  • Galéria
  • Features
  • Specifications

Áttekintés

AT-ART1000

Direct Power sztereó mozgótekercses hangszedő
AT-ART1000

Features

AT-ART1000

Engineered for sound excellence

Continuing the pursuit of sound excellence and with a heritage in phono cartridge manufacture spanning over 54 years, Audio-Technica have developed and engineered the AT-ART1000 to deliver the highest listening experience for playing analogue records.

The AT-ART1000, the most advanced cartridge to date, marries analogue audio expertise with cutting-edge materials and design - incorporating a direct power system, often viewed as a theoretical ideal in cartridge development.

  • Handcrafted with Japanese precision refined over 54 years in cartridge design
  • Direct Power System renders the most subtle sonic detail and delivers unsurpassed transient response
  • Special line contact with diamond stylus construction has the ability to track the most complex record groove
  • Non-magnetic core coil with 3 ohms impedance
  • Lightweight solid boron cantilever for superior strength and controlled movement
  • Titanium body, expertly machined to provide solid, acoustic audio reproduction

Direct Power System

To ensure audio quality is uncompromised by the cantilever’s length and material, the moving coil is positioned directly above the stylus tip without the need to transmit along the length of the cantilever. This close proximity between the coil movement and stylus tip allows the AT-ART1000 to vividly reproduce the finest sonic details, incredibly accurate medium and low frequencies, and deliver unsurpassed transient response.

Made In Japan

Meticulously handcrafted in Japan with over 54 years in cartridge manufacture and design heritage.

NON-MAGNETIC CORE COIL

20μm diameter PCOCC coil wire, wound eight turns to a diameter of 0.9mm creates a non-magnetic core coil. Despite its non-magnetic core type, a 0.2mV output voltage is delivered by placing a 3 ohm coil within the miniscule 0.6mm gap of a powerful magnetic circuit.

Cartridge Rebuild Programme

To protect against damage to the cantilever and wear to the stylus tip of this product, we offer a paid-for Cartridge Rebuild Programme service.

This programme provides the replacement of the whole assembly including stylus tip, cantilever, coils, and rubber dampers.

For complete details about this program, please contact your local Audio-Technica Service Center.

Please be aware that this program may be discontinued without prior notice, depending on the availability of spare parts or the amount of time that has passed since the release of the product.

Specifications

Cartridge & Stylus
Frekvencia átvitel 15 - 30 000Hz
Csatorna szeparáció 30dB (1kHz)
Vertikális követési szög 21˚
Tű konstrukció Special Line Contact
Ajánlott terhelő impedancia 30Ω
Tekercs impedancia 3Ω (1kHz)
Kimeneti feszültség 0,2mV (1kHz, 5 cm/sec.)
Kimeneti csatorna egyensúly 0,5dB (1kHz)
Tűszár 0.26mm (0.01”) átmérő, nagy szilárdságú bórból
Statikus engedékenység 30 x 10-6 cm/dyne
Dinamikus engedékenység 12 x 10-6 cm/dyne (100Hz)
Mellékelt tartozékok Non-magnetic screw driver, 2 x Washer, Protector, 2 x Nut, Cartridge installation screws (2 x 12mm, 2 x 18mm), Brush, PCOCC Lead wire set
Típus Direct Power System
Tömeg 11g

Letöltések

Declaration of Conformity