AT-LP5X
Fully Manual Direct-Drive Turntable

AT-LP5X

Out of Stock
AT-LP5X
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

AT-LP5X Fully Manual Direct-Drive Turntable

Building on Audio-Technica’s analogue heritage and over 50 years of Japanese audio design, the AT-LP5x features upgraded technology while keeping the contemporary style and acclaimed performance of its predecessor, the AT-LP5.

The LP5x retains the J-shaped tonearm, a design inspired by the classic Audio-Technica models of the 1960s and ’70s, and features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. The tonearm also includes an adjustable counterweight and anti-skate control and comes fitted with a lightweight (9.3g) AT-HS6 headshell and the black AT-VM95E Dual Moving Magnet stereo cartridge.

Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5x turntable has been designed to limit low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, low-noise motor, ensuring stable, on-axis rotation at 33-1/3, 45 and 78 RPM. A 5 mm thick rubber-damping mat, which isolates from low frequency feedback while providing a highly stable surface for all LP formats, tops the platter.

The AT-LP5x features a built-in switchable MM/MC phono/line preamp that enables it to connect directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The selection of MM/MC cartridges allow for an easy upgrade to a moving coil with additional equipment. The turntable is also equipped with a USB output for direct connection to a computer.

AT-LP5X

Features

  • Direct-drive, low noise motor
  • Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM
  • AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus
  • Lightweight AT-HS6 headshell
  • J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, is engineered to minimize tracking errors
  • Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input
  • Anti-resonance, die-cast aluminum platter
  • Heavy rubber damping mat for improved low-frequency reproduction
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Elegant matte black finish
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable
  • Included dust cover and mounting hardware

Specifications

Turntable
Type 3-speed, fully manual operation
Motor DC motor
Drive Method Direct Drive
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter Die-cast aluminum
Starting Torque > 1.0 kgf.cm
Braking System Electronic brake
Wow and Flutter < 0.2% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio > 50 dB
Output Level PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE 250 mV nominal at 1 kHz, 5 cm/sec
Output Level “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec “LINE (MM)”: 250 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain MM: 36 dB nominal, RIAA equalized; MC: 56 dB nominal, RIAA equalized
USB Function A/D: 16 bit 44.1 kHz or 48 kHz USB selectable; Computer interface: USB 2.0 compliant Windows 7 or above, MAC OS X or above
Power Supply Requirements 100-240V AC, 50/60 Hz
Dimensions 450.0 mm (17.72") × 352.0 mm (13.86") × 157.0 mm (6.18") (W × D × H)
Weight 7.3 kg (16.1 lbs.)
Accessories Included AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus; AT-HS6 lightweight headshell; AC adapter ; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; dust cover with hinges.
Accessories Included Dust cover, Rubber mat, Platter, Counterweight, Headshell (AT-HS6) with VM stereo cartridge (AT-VM95E), 45 RPM adapter, Dust cover hinges, USB cable (1.9 m (6.2')), RCA audio cable (approx. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9') (AD-SE1220KZ)

Downloads

AT-LP5X Quick Start Guide
AT-LP5X User Manual
AT-LP5X Caution Guide
AT-LP5X FCC DOC