Discontinued
Adaptive-array Microphone System
AT895
$0.00
Out of Stock
AT895
Specifications
Microphones | |
---|---|
Element | (5) Fixed-charge back plate, permanently polarized condenser |
Pickup Pattern Modes | Full-field adaptive, Planar adaptive, Line + Gradient |
Frequency Response | 60-12,000 Hz |
Low Frequency Roll Off | 80 Hz, 18 dB/octave |
Open Circuit Sensitivity | -23 dBV (70 mV) at 1 Pa, 1 kHz |
Output Impedance | 450 ohms |
Maximum Input Sound Level | 117 dB SPL, 1 kHz at 1% T.H.D. |
Noise | 24 dB |
Dynamic Range | 93 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 70 dB, 1 kHz at 1 Pa |
Power Requirements | External -- 9-15V DC, 250 mA typical |
Battery Type | AT895BH -- Three 9V (NEDA type 1604), not included Typical Life: Alkaline, 4-6 hours; Lithium, 10-12 hours |
Weight | AT895 Microphone (less cable): 16.7 oz (473 g) AT895CP Control Pack: 10.0 oz (284 g) AT895BH Battery Holder (with typical batteries): 7.6 oz (215 g)) AT895PG Pistol Grip: 10.0 oz (284 g) AT895Z Zeppelin Windscreen: 5.0 oz (142 g) |
Cable | 6 conductor shielded cable with XLR7F-type connectors AT895/RK: 10' (3.0 m) long AT895/MK: 25' (7.6 m) long |
Output Connector | Control Pack: Integral 3-pin XLRM-type |
Band-Pass Filter | 300-5,500 Hz, 6 dB/octave |
Downloads
AT895 Manual