![AT4050/LE AT4050/LE](https://www.audio-technica.com/en-ca/media/catalog/product/cache/177161fc218aa2dd413f2b73f6832b88/a/t/at4050-le_01.png)
Discontinued
LIMITED EDITION Multi-pattern Condenser Microphone
AT4050/LE
AT4050/LE
Features
- Special 50th anniversary edition in silver-colored metallic finish with etched-on serial number and carefully crafted wooden carrying case
- Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Custom shock mount provides superior isolation
Specifications
Microphones | |
---|---|
Element | Externally-polarized (DC bias) condenser |
Polar Pattern | Cardioid, Omnidirectional, Figure-of-eight |
Frequency Response | 20-18,000 Hz |
Low Frequency Roll Off | 80 Hz, 12 dB/octave |
Open Circuit Sensitivity | -36 dB (15.8 mV), re 1V at 1 Pa |
Maximum Input Sound Level | 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
Noise | 17 dB |
Dynamic Range | 132 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 77 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 48V DC, 4.2 mA typical |
Switches | Polar selection; Flat, roll-off; 10 dB pad (nominal) |
Weight | 510 g (18.0 oz) |
Dimensions | 188.0 mm (7.40") long, 53.4 mm (2.10") maximum body diameter |
Output Connectors | Integral 3-pin XLRM-type |
Accessories Included | AT8449 shock mount for 5/8"-27 threaded stands; 5/8”-27 to 3/8”-16 threaded adapter; microphone dust cover; wooden case |
Audio-Technica Case Style | R1 |
Downloads
AT4050/LE Specification Sheet