![AT-LP70X AT-LP70X](https://www.audio-technica.com/en-au/media/catalog/product/cache/177161fc218aa2dd413f2b73f6832b88/a/t/at-lp70x_bz_01a.png)
Fully Automatic Belt-Drive Turntable
AT-LP70X
From
$499.00
From
AT-LP70X
Features
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- A fixed-body AT-VM95C Integral Dual Moving Magnetâ„¢ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Stylish three-piece chassis construction dampens resonance for improved sound quality*
- J-shaped tonearm is engineered to minimize tracking errors
- Tonearm lock reduces risk of stylus damage
- Built-in switchable phono/line pre-amplifier
- Anti-resonance, die-cast aluminum platter with felt mat
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chainÂ
- Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
*Compared to AT-LP60X.
Specifications
Turntable | |
---|---|
Motor | DC motor |
Drive Method | Belt drive |
Speeds | 33-1/3 RPM, 45 RPM |
Turntable Platter | Die-cast aluminium |
Wow and Flutter | < 0.25% (WTD) |
Signal-to-Noise Ratio | > 55 dB |
Cartridge Type | This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed. |
Output Level | PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 252 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain | 36 dB nominal, RIAA equalized |
Power Consumption | 1.5 W |
Dimensions | 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H) |
Weight | Approx. 2.9 kg (6.4 lbs) |
Accessories Included | • Dust cover • Felt mat • Platter (with drive belt) • Dust cover hinges • 45 RPM adapter • RCA audio cable (Approx. 1.0 m (3.3')) • AC adapter (Approx. 1.5 m (4.9')) |
AC Adapter | *Type: FJ-SW1261200500DN Rated Input Voltage: 100 to 240 V AC Rated Input Current: 0.4 A max. Rated Frequency: 50 Hz / 60 Hz Rated Output Voltage: 12 V DC Rated Secondary Current: 0.5 A Cable Length: Approx. 1.5 m (4.9') |
Effective Arm Length | 220 mm (8.7") |
Overhang | 18 mm (0.71") |
Tracking Error Angle | Less than 2.0° |
Replacement Stylus | AT-VMN95C (sold separately) |
Replacement Belt | AT-LP70X exclusive belt (sold separately) |
Notes | *The included AC adapter may differ depending on the country of sale. Check the rating label on the AC adapter. For details, contact your local Audio-Technica dealer. For product improvement, the product is subject to modification without notice. |
Downloads
Quick Start Guide
Manuals
Caution Guide